Blog
The correct way to open for cleaning and maintaining a steam engine
STEP1:
After the daily operation is completed, use a clean, disinfected and damp cloth to wipe the steam machine cover, body and back panel.
STEP2:
Place the faucet nozzle and the removed part (make sure the machine is cooled down and be careful of burns) into the storage box and immerse them in hot water for 10 to 15 minutes.
STEP3:
Wipe and clean with a cloth, ensuring that the inside and outside of the nozzle are thoroughly clean.
Then, correctly install the faucet nozzle back onto the faucet handle.
(Before installation, note that there is a white gasket at the marked arrow position.)
The steam engine needs to undergo a cleaning operation once a week.
STEP1:
Before discharging the wastewater, it is necessary to first release the pressure inside the inner tank. Click "System Parameter Settings", enter the password "335", and then click "Steam Discharge" to automatically relieve the pressure.
STEP2:
Remove the faucet nozzle (wait for the machine to cool down, be careful of burns). Place it in the storage box. Add a weak acid descaling agent and let it soak for at least 2 minutes (follow the packaging instructions for the ratio; for severe milk stains, it is recommended to use citric acid).
STEP3:
After disinfection, rinse with warm water until no disinfectant residue remains. After disinfection is complete, correctly install the nozzle back onto the faucet handle (note that there is a white gasket at the marked area on the front of the handle before installation).